How so I set up my Outdoor Smart Timer

Quick Guide

Introduction

The Outdoor Smart Timer powers your Farmstand’s pump automatically, adjusting cycles for Day/Night and temperature. Control it with the button on the timer or V4.0 of the Lettuce Grow App (available September 2025).

Which Mode Should I Use?

1. COOL < 65°F ❄️ (Blue)

2. WARM 65–85°F 🌤 (Purple, default)

3. HOT > 85°F 🌞 (Red)

4. USER-DEFINED 📱  (App only, coming September 2025)

Button Controls

1. Hold 15s: Reset + Pair → factory reset and pairing mode (LED blinks blue)

2. Hold 5s: DayStart → sets “daytime” to the current time (mode unchanged).

3. Double press: Pump Test → runs pump for 5 minutes, stops automatically (or with one press), then returns to previous mode.

4. Quick press: Temperature modes (Cool → Warm → Hot).

5. If in User-Defined, first press returns to Warm.

LED Indicator Guide

1. 🔵 Blinking fast → Pairing

2. 🔵 Solid → Cool

3. 🟣 Solid → Warm

4. 🔴 Solid → Hot

5. 🔵/🔴 Alternating → User-Defined

6. 🔴 Blinking fast → Pump Test

Default Cycles

(Default Daytime: 8 AM–10 PM; Nighttime: 10 PM–8 AM)